Oxygen Production Cost Reports - Q2 2019
Capital Investment & Operating Cost of Oxygen Plants
Oxygen (a.k.a. O2) is a nonmetallic element and one of the most abundant elements on Earth’s surface, accounting for approximately 23 wt% of the atmosphere, 86 wt% of seawater, and 47 wt% of the Earth’s crust. Under standard conditions, Oxygen is a diatomic gas with molecular formula O2.
Intratec offers professional, easy-to-understand reports examining Oxygen production. Each study describes an industrial plant, including main process units and site infrastructure, and presents an independent analysis of capital and operating costs. All reports are based on the most recent economic data available (Q2 2019).
You can find below reports focused on Oxygen production processes currently offered by Intratec. If none of the off-the-shelf reports listed below fits your needs, you can request a bespoke report tailored to your needs, for as low as USD 2,900!
Oxygen Production | Oxygen E11A
This study provides a techno-economic analysis of a typical cryogenic distillation process for Oxygen production using atmospheric air as the starting material. Oxygen main product and nitrogen by-product are produced as high pressurized gases. The economic analysis presented assumes a plant located in the USA.
This report is also available in report subscriptions offered by Intratec.
Details: 800 MM Nm3a United States-based plant | Q2 2019 | 106 pages From $799
The cost analyses presented in the report Oxygen E11A target a 800 MM Nm3a (kilometric tons per annun) United States-based plant. For those interested in cost analyses considering other plant capacities and/or locations, Intratec offers a customized analysis as an optional feature.
Oxygen Production | Oxygen E12A
This report examines the economics of Oxygen production in a plant also located in the United States, using atmospheric air as the starting material. Different from the process examined in the report “Oxygen E11A”, the process presented in this report also produces argon as by-product. Nitrogen and the majority of the Oxygen produced are supplied in gaseous phase. Oxygen is also supplied in liquid phase, as well as all argon produced.
Details: 800 MM Nm3a United States-based plant | Q2 2019 | 106 pages From $799
The cost analyses presented in the report Oxygen E12A target a 800 MM Nm3a (kilometric tons per annun) United States-based plant. For those interested in cost analyses considering other plant capacities and/or locations, Intratec offers a customized analysis as an optional feature.
Oxygen Production | Oxygen E13A
This report presents a feasibility analysis of Oxygen production in the USA, using atmospheric air as the starting material. In this case, a typical vacuum swing adsorption process is applied for the production of low purity Oxygen. In this process, switching beds, each containing two strata, absorb water, carbon dioxide and nitrogen from the air, yielding low purity oxygen.
Details: 40 MM Nm3a United States-based plant | Q2 2019 | 106 pages From $799
The cost analyses presented in the report Oxygen E13A target a 40 MM Nm3a (kilometric tons per annun) United States-based plant. For those interested in cost analyses considering other plant capacities and/or locations, Intratec offers a customized analysis as an optional feature.
Could Not Find the Production Cost Report you Need?
If none of the Oxygen reports listed above fits your needs, you can request a bespoke report examining the process you are interested in! You will have a report tailored to your needs, in which you defined production process, industrial plant capacity and location!
Details: Customer-defined Plant Location & Capacity | Q2 2019 From $2,900
Use our Reports as
Feasibility Studies
Techno-economic Evaluations
Investment Analyses
Multi-regional Cost Analyses
Trusted By
