Production Cost Report
cr-e11a,cr-e21a
xxx
Polychloroprene
Polychloroprene
Neoprene
Chloroprene Rubber
Polychloroprene (a.k.a. Neoprene, Chloroprene Rubber) is the first synthetic rubber produced commercially by the free radical emulsion polymerization of chloroprene. It was first marketed by Dupont in 1933 under the DuPrene brand, and after significant improvements in the production process the brand was changed to Neoprene. Nowadays, it is one of the most important special rubbers produced, alongside butyl rubber, nitrile rubber (NBR) and ethylene propylene diene rubber (EPDM).

Polychloroprene Production Cost Reports - 2019/20

Capital Investment & Operating Cost of Polychloroprene Plants

Polychloroprene (a.k.a. Neoprene, Chloroprene Rubber) is the first synthetic rubber produced commercially by the free radical emulsion polymerization of chloroprene. It was first marketed by Dupont in 1933 under the DuPrene brand, and after significant improvements in the production process the brand was changed to Neoprene. Nowadays, it is one of the most important special rubbers produced, alongside butyl rubber, nitrile rubber (NBR) and ethylene propylene diene rubber (EPDM).

Intratec offers professional, easy-to-understand reports examining Polychloroprene production. Each study describes an industrial plant, including main process units and site infrastructure, and presents an independent analysis of capital and operating costs. All reports are based on the most recent economic data available (2019/20).

Polychloroprene Production - Cost Analysis | CR E11A

This report presents the economics of Chloroprene Rubber (or Polychloroprene) production from chloroprene using a typical emulsion process. The economic analysis is based on a plant constructed in the USA.

Analysis Basis: United States   |   2019 Q1   |   107 pages   From $999

Polychloroprene Production - Cost Analysis | CR E21A

This study provides an economic analysis of Polychloroprene production starting from butadiene and chlorine, based on a plant located in the United States. In the first step, butadiene is chlorinated, generating dichlorobutenes, which are subjected to an isomerization to convert them to 3,4-dichloro-1-butene. It is undergoes an hydrochlorination, forming chloroprene. Finally, chloroprene is polymerizated the respective rubber.

Analysis Basis: United States   |   2019 Q1   |   106 pages   From $1,499

Request a Custom Polychloroprene Production Cost Report

Could not find a report examining the Polychloroprene production process of your interest?

Not a problem! Intratec can develop a custom Production Cost Report examining the process you are interested in!

Analysis Basis: Customer-defined Location   |   2019 Q1 From $2,900

Use our Reports as

Feasibility Studies

Techno-economic Evaluations

Investment Analyses

Multi-regional Cost Analyses

Trusted By

BASF
Monsanto
Linde